How to clean fire and smoke damage is a question that homeowners around the world must be asking each year. The danger of experiencing a fire in a home is real, even if the house is built to be resistant to fire.

Still, damage can occur due to overzealous handymen or careless people. It will cost a lot of time and money to get your home ready for the next season of activities, so learning how to clean fire and smoke damage is essential.

This article is going to offer some tips that you can use to make sure that your home looks great when the next season of the fun comes around. The first thing that you need to do when learning how to clean fire and smoke damage is to strip all of the carpeting from the rooms that look like they might have fires or smoke. Disaster Plus has services that center around fire and smoke damage and cleaning it off effectively.

If you have expensive furniture pieces in one of these rooms, it may be best to throw them out and replace them with cheaper, disposable pieces. After you’ve stripped the carpeting from these rooms, you will also need to sweep the floors and get any cobwebs or ash out of the room.

You don’t want this stuff to seep into your carpets and cause costly structural problems. Another important step when learning how to clean fire and smoke damage is to deodorize the rooms. Many people who have had a fire are surprised to learn that the smell is often worse than the actual fire itself.

So, take the time to get rid of any smelly clothes or other items in the rooms that should not be in them. If you must, hire a professional deodorizer to do it for you. At least then, the room will be cleaner and fresher than it was before the fire.

After you’ve gotten the odor under control, start cleaning with soap and water. Use only soap and water, and try to use the hottest water possible. This could mean adding several hundred degrees to the water if needed. Also, try to use non-toxic laundry cleaning products.

Never use bleach or other harsh chemicals. Bleach can actually cause mold and mildew to grow in very poor conditions, so use it sparingly and with discretion. After taking care of the bad odor, you should focus on getting everything back to its original state. First off, try to dry the area as much as possible.

If this isn’t possible, you should try to cover the fire damage with plastic sheeting or something similar. You should also try to salvage anything you can that is of use to the overall structure. Things like old breakable glassware can make great fire restoration material.

Once you’ve done the best you can with the odor and the water, you should focus on getting everything dried as soon as possible. Once again, this means covering the fire damage with plastic sheeting and/or other items that will protect it from the elements.

When trying to clean fire and smoke damage, always remember that prevention is key. For example, you should never run the washing machine while the area is still damp. You also shouldn’t open the windows until the area has completely dried.

It’s best to be patient and not worry about saving money and time; you should focus on making sure that any damage that does occur is properly taken care of. Of course, learning how to clean fire and smoke damage is only part of the process. After you’ve salvaged whatever you can, you need to make sure you dry everything thoroughly.

In fact, you should consider using a shop vac for this purpose, as well as a blow dryer or heat gun. You can also consider using absorbent mulch, but you’ll want to keep the pile away from combustible material in order to limit the risk of an explosion.

As far as keeping things dry, you should keep in mind that it’s fine to shovel water into the fire area, but you should never pour water directly onto combustible material, such as wood or paper. Overall, learning how to clean fire and smoke damage can be a simple process if you take the time to remember a few basic tips.

Wet items should be dried as quickly as possible and all materials should be covered and stored in a safe manner. You’ll want to avoid using your vacuum for this task, but you should remember that a shop Vac and/or blow dryer should work just fine in this regard.